A pilot study of half-value layer measurements using a semiconductor dosimeter for intraoral radiography.

Purpose: This pilot study was conducted to evaluate half-value layer (HVL) measurements obtained using a semiconductor dosimeter for intraoral radiography. Materials and Methods: This study included 8 aluminum plates, 4 of which were low-purity (less than 99.9%) and 4 high-purity (greater than 99.9%). Intraoral radiography was performed using an intraoral X-ray unit in accordance with the dental protocol at the authors' affiliated hospital: tube voltage, 60 kVp and 70 kVp; tube current, 7 mA; and exposure time, 0.10 s. The accuracy of HVL measurements for intraoral radiography was assessed using a semiconductor dosimeter. A simple regression analysis was performed to compare the aluminum plate thickness and HVL in relation to the tube voltage (60 kVp and 70 kVp) and aluminum purity (low and high). Results: For the low-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the thickness of the aluminum plate (X), with Y = 1.708 + 0.415X (r=0.999, P<0.05) and Y = 1.980 + 0.484X (r=0.999, P<0.05), respectively. Similarly, for the high-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the plate thickness (X), with Y = 1.696 + 0.454X (r=0.999, P<0.05) and Y = 1.968 + 0.515X (r=0.998, P<0.05), respectively. Conclusion: This pilot study examined the relationship between aluminum plate thickness and HVL measurements using a semiconductor dosimeter for intraoral radiography. Semiconductor dosimeters may prove useful in HVL measurement for purposes such as quality assurance in dental X-ray imaging.

A case of odontogenic keratocyst in the buccal space: characterization by multimodality imaging including computed tomography, diffusion-weighted magnetic resonance imaging, and ultrasonography.

Odontogenic keratocyst (OKC) is a relatively common non-inflammatory jaw lesion. OKC is known to occur most often in the mandibular angle and mandibular ramus, but rarely outside the bone. In this report, we describe characteristic multimodality imaging of OKC in the buccal space, especially diffusion-weighted MR imaging (DWI) with apparent diffusion coefficient (ADC) mapping, extra-oral and intra-oral ultrasonography. On clinical examination, an approximately 20 mm in diameter mass with elastic hardness was found the left side of the buccal area. Contrast-enhanced CT showed areas of internal non-contrast lesions in the left buccal space. On T1-weighted image, the mass showed multilocular high signal intensity, and homogeneous internal. T2-weighted images revealed high signal at the marginal part and slightly median signal in the internal part. STIR images revealed a heterogeneous high signal in the interior. Furthermore, DWI and ADC map showed high signal and moderate-to-low signal intensity, respectively. ADC value of the lesion was 1.55 × 10-3 mm2 s-1. On extra-oral ultrasonography, the tumor showed clear boundary, hypoechoic, homogeneous internal architecture and vascular signals, and heterogeneous hard of the lesion. On intra-oral ultrasonography also showed clear boundary, hypoechoic, homogeneous internal architecture, heterogeneous hard of the tumor, and back echo enhance. The histopathologic diagnosis based on a full excisional specimen was odontogenic keratocyst. This case suggests that multimodality imaging, especially MR imaging with ADC and DWI, and extra and intra-oral ultrasonography with color Doppler imaging and elastography, could be effective for evaluating buccal lesions.

Maximum and mean standardized uptake values of medication-related osteonecrosis of the jaw with bone SPECT/CT: comparison of mandibular pathologies, control and temporomandibular joints.

OBJECTIVE: Recently, single-photon emission CT/CT (SPECT/CT) plays an important role in assessing patients with medication-related osteonecrosis of the jaw (MRONJ). The aim of this study was to investigate maximum and mean standardized uptake values (SUVs) of MRONJ with bone SPECT/CT, especially comparison of mandibular pathologies, control and temporomandibular joints. METHODS: 61 mandibular patients with MRONJ who underwent bone SPECT/CT were included in this study. The maximum and mean SUVs of the lesion, right and left sides of the lesion, opposite side of the lesion as control, right and left temporomandibular joints were analyzed using a workstation and software. The SUVs of MRONJ were analyzed using one-way analysis of variance with Tukey's honestly significant difference test. Patient characteristics with MRONJ and SUVs were analyzed using Mann-Whitney U test. P-values less than 0.05 were considered to indicate statistical significance. RESULTS: The maximum and mean SUVs for opposite side of the lesions (4.4 ± 2.0 and 1.8 ± 0.7) were significantly lower than those for mandibular lesions (18.3 ± 8.1 and 6.3 ± 2.8), right side of the lesions (8.1 ± 3.9 and 2.9 ± 1.3) and left side of the lesions (8.1 ± 3.9 and 2.8 ± 1.4), respectively. The maximum and mean SUVs for right and left sides of the lesions, and opposite side of the lesions, right and left temporomandibular joints were not significant difference. Furthermore, the maximum SUVs of the mandibular lesions were a significant difference for age and staging. CONCLUSIONS: The maximum and mean SUVs with SPECT/CT can be useful in the quantitative management of MRONJ patients.

Evaluation of the efficacy of diffusion-weighted magnetic resonance imaging and apparent diffusion coefficients in the diagnosis of maxillary diseases.

OBJECTIVE: We investigated the efficacy of using diffusion-weighted imaging (DWI) with quantitative apparent diffusion coefficient (ADC) mapping in the diagnosis of maxillary diseases. STUDY DESIGN: We evaluated 146 cases of maxillary diseases (32 malignant tumors, 11 benign tumors, 28 maxillary cysts, 60 cases of maxillary sinusitis, and 15 maxillary sinus retention cysts) that had been examined using magnetic resonance imaging. The DWI sequence was obtained with b values of 0 and 800 s/mm2 and ADC values were calculated. We used one-way analysis of variance and the Tukey honestly significant difference test to identify differences within and between the types of diseases. RESULTS: Mean ADC values for malignant tumors (1.07 × 10-3 mm2 s-1) were significantly lower than ADCs for benign tumors (1.85 × 10-3 mm2 s-1), maxillary cysts (1.77 × 10-3 mm2 s-1), maxillary sinusitis (2.34 × 10-3 mm2 s-1), and maxillary sinus retention cysts (2.52 × 10-3 mm2 s-1), with P < 0.001.   Mean ADC differed significantly between all disease types except between maxillary sinusitis and maxillary sinus retention cysts. ADC values also significantly differed between specific lesions within the malignant tumor and maxillary cyst groups. CONCLUSIONS: The use of ADC values can be useful in the differential diagnosis of malignant maxillary diseases, benign lesions, cysts, and inflammatory and reactive conditions.

Accuracy of non-contact semiconductor X-ray analyzer for quality assurance in intraoral radiography: a comparison with ionization chamber dosimeter.

OBJECTIVES: The aim of the present study was to evaluate the accuracy of a non-contact semiconductor X-ray analyzer for quality assurance in intraoral radiography, especially a comparison with an ionization chamber dosimeter. METHODS: Intraoral radiography was performed with intraoral X-ray unit using the dental protocol at our hospital: tube voltage, 70 kV; tube current, 7 mA. Accuracy of dose and half-value layer (HVL) measurements was analyzed with a non-contact semiconductor X-ray analyzer and an ionization chamber dosimeter. Stability of the semiconductor sensor, effect of scattered radiation, and comparison of measured HVL between the ionization chamber and the semiconductor sensor were analyzed in this study. RESULTS: The values with the semiconductor sensor were tube voltage: 70.3 ± 0.2 kVp (degree of variability: 0.28%), dose: 454.1 ± 12.3 µGy (degree of variability: 2.7%), and HVL: 1.91 ± 0.02 mmAl (degree of variability: 1.0%). With collimator, the dose with the semiconductor sensor and the ionization chamber decreased by 2.3 µ Gy and 5.2 µ Gy, respectively. The measured HVL of the semiconductor dosimeter was more than that of ionization chamber, and the semiconductor dosimeter was less than ionization chamber in variation of between without and with collimator. CONCLUSION: This study indicated the accuracy of a non-contact semiconductor X-ray analyzer for quality assurance in intraoral radiography, especially a comparison with an ionization chamber dosimeter. The semiconductor sensor can be useful for quality assurance in intraoral radiography.

Characteristic multimodal imaging of palatal follicular lymphoma: a case report on effectiveness of CT, diffusion-weighted MR imaging and intraoral ultrasonography.

Oral lymphomas are relatively uncommon. Follicular lymphoma is the second most common subtype of non-Hodgkin lymphoma. We report characteristic multimodal imaging of palatal follicular lymphoma, especially CT, diffusion-weighted MR imaging (DWI) and intraoral ultrasonography. A 67-year-old woman presented with swelling on the right side of the palate within 2 months. On clinical examination, an approximately 35 × 20 mm mass lesion with elastic soft was found to overlay the right side of the palate. Contrast-enhanced CT image showed a mass with homogeneous enhancement on the right side of the palate, and bone tissue algorithm CT showed focal erosion of the right posterior maxilla. Regarding MR imaging, on T1-weighted image, the mass showed low signal intensity and homogeneous enhancement, and T2-weighted and STIR images revealed intermediate and high signal intensity, respectively. Furthermore, DWI and apparent diffusion coefficient (ADC) map showed high and low signal intensity, respectively. ADC value of the mass was 0.60 × 10-3 mm2s-1. On intraoral ultrasonography, the mass showed clear boundary, hypoechoic echogenicity, homogeneous internal architecture, vascular signals using color Doppler imaging and heterogeneous hard using strain elastography. A partial biopsy of the palatal region was performed. Histopathological diagnosis was follicular lymphoma. This case suggests that multimodal imaging, especially CT, DWI with ADC map and intraoral ultrasonography with color Doppler imaging and strain elastography, could be effective for evaluating palatal lesions.

Maximum standardized uptake value of normal structures in the head and neck with bone SPECT/CT.

INTRODUCTION: The quantitative parameter was successfully derived from the quantitative bone SPECT/CT images. The aim of this study was to evaluate maximum standardized uptake value (SUV) of normal structures in the head and neck with bone SPECT/CT. METHODS: Fifty-three patients with jaw lesions (11 chronic osteomyelitis, eight osteoradionecrosis and 34 medication-related osteonecrosis of the jaw) who had bone SPECT/CT were prospectively included. The maximum SUV of normal structures including vertebrae, sternal body, parietal bone and hyoid bone were analysed. Statistical analyses for the maximum SUV were performed by Pearson's rank correlation test. A P value lower than 0.05 was considered statistically significant. RESULTS: The maximum SUVs of vertebrae, sternal body, parietal bone and hyoid bone of all patients were 8.10 ± 3.72, 5.16 ± 2.05, 3.67 ± 1.55 and 1.44 ± 0.56, respectively. Furthermore, the maximum SUV of vertebrae was significantly correlated with that of sternal body (Y = 0.527X + 5.388 (R2 = 0.084, P = 0.035)). CONCLUSIONS: Maximum SUV with bone SPECT/CT should be useful for characterization of normal structures in the head and neck. Furthermore, the data reported herein can be used for reference in future studies and in clinical settings for head and neck lesions.